The Best DIY Way to Get Rid of Pool Algae

By  Kristen Swope

Anyone who’s ever owned a swimming pool has likely encountered that slimy greenish tint floating on the water’s surface or stubbornly attached to the pool’s walls and floor called algae. Having algae in a pool means several things, and none of them are attractive or healthy. For one thing, an algae-infested pool is nearly as uninviting as swimming in shark-infested waters not just because of how murky it looks, but also because of the unseen but apparent danger it poses. Thick algae make it difficult to detect potentially harmful debris and other things underwater that can injure a swimmer. Also, the presence of algae indicates that the pool water contains E. coli, a type of bacteria whose certain strains can cause gastroenteritis and UTI.

Algae should go away so people can enjoy their swimming pools to the fullest. For some pool owners, calling on the services of professional cleaners is the ultimate solution, but those who are on a pool maintenance budget can simply consider the following steps to make their swimming pools algae-free and crystal clear.

 

  • Thoroughly clean the filters and scrub the pool walls.

These steps are very important especially for pool owners who have left their swimming pools for a long time to accumulate a very thick layer of algae so that the water is hardly visible. For extremely murky pools there is no other resort but to totally drain it, and then scrub the acrylic pool walls and floor to get rid of every last trace of algae so they won’t re-attach themselves to surfaces and flourish any time soon. Use a tile brush for tiled swimming pools, and a scrub brush with nylon bristles for fiberglass or vinyl pools. Clean out the pool’s filters very well to ensure a good flow by removing the entire grid and then scrubbing it off carefully and hosing it clean. If a pool vacuum is available, use it to clear out the pool’s bottom of dead bugs, dirt, and other pool debris before they permanently stain the floor or cause injury.

  • Balance the water and shock your pool.

A water testing kit can be used to test the pool’s chemical levels and its alkalinity. Too much alkaline can actually stain a pool, while too much chlorine can cause eye and skin irritation to swimmers. Pool water’s appropriate pH level falls within the 7.2 to 7.6 range and alkalinity between 80-120 ppm because this where added chlorine is most efficient at keeping algae at bay. Anything higher can render chlorine shocking useless. Balancing pool water is an important preliminary to totally getting rid of algae because the very presence of algae means both the alkaline and pH levels of the pool are off. Administer an appropriate dose of chlorine shock to the pool based on the manufacturer’s instructions, or with the advice of a professional pool maintenance person to get the desired effect. After making sure that the filters are working fine, leave the chlorine-treated pool for at least 24 hours.

  • Re-check pool water conditions and signs of dead algae.

After the 24 hour mark, test the pool water for balance once more. Dead algae turns a grayish color and can either float on the water’s surface or settle on the pool floor. Check for any remaining green algae because this needs to be completely zapped. If there are any left, a second dose of chlorine shocking might be needed. Repeat the process until all traces of live algae are eliminated.

  • Vacuum up the dead algae and clean the pool’s filter once more.

Use the pool vacuum once more to pick up every last bit of dead algae and remaining debris without wreaking havoc on the pool filter. Backwash the pool filters so they can work in the best capacity and prevent algae from returning too quickly. Make it a weekly habit to test the pool water’s chemical balance to keep track of the possibility of another unwanted algae infestation.

 

Also, the blog loads extremely quick for me on Safari. Exceptional Blog Sildenafil Ed Pillen! Bestellen Sie jetzt unter view. In unserem Online-Shop generika nur bew€Ahrte Produkte von den besten Herstellern.

Steps to Cleaning a Swimming Pool

Swimming pools are great additions to homes because they call families outdoors to play, swim, splash, and have lots of fun. Though being an owner of a pool comes with its responsibilities. One of these main responsibilities is cleaning the pool thoroughly and regularly. And, cleaning does not only encompass particle removing; one also must add chemicals to the pool so that it does not only look clean, but is microscopically.

The various steps to cleaning a swimming pool are not that difficult. As long as the owner maintains a schedule of cleaning and maintaining the pool throughout the week, especially during the summer, he/she will not be stuck doing a complete cleaning job. Therefore, maintenance is key; failing to regularly clean the pool will result in a toxic-looking mess that will spend hours to bring back to a normal level of cleanliness. To clean a pool, you will need the following materials:

Leaf Skimmer – This tool has a long handle with a net on the end to skim out particles.

Pool Vacuum – A pool specialized pool vacuum sucks up dirt from the pool floor.

Floor and Wall Brush – This brush is used to bust out caked on dirt on the sides and bottom of the pool.

Tile Brush – This is a smaller, hand-held brush that is used to get into small corners; it’s perfect for tile grout.

Algae Brush – Unlike a standard floor and wall brush, the algae brush is made of stainless steel to knock out algae from the sides of pools with walls made of plaster.

Outside of the aforementioned tools, the pool owner should have a clean filter, efficient pump, and adequate supply of water. Before attempting to clean the swimming pool, it is important to ensure all mechanisms are in place and clear of debris or any other obstructions. Although some, especially those cleaning the pool for the first time in a long time, empty the pool before cleaning it. Though this makes for adequate cleaning, it is not necessary. Emptying the pool makes sense only when it is extremely dirty and has not been cared for in a while. However, if you’re dealing with a particularly dirty pool and need to dispose of debris or waste, you can rent a dumpster from services like Dumposaurus Dumpsters & Rolloff Rental. The simple steps to cleaning a swimming pool when it is full of water are:

1. Skim out all larger debris (or anything else that does not belong) with the Leaf Skimmer. Anything that is still on the surface must be scooped out before moving on to the proceeding steps. If there is any debris, leaves, or other sediments on the bottom, you should try and move them a little bit with the skimmer and see if they float up; if they do, scoop them up and remove them from the pool – it will make the rest of the steps easier.

2. Take whichever brush you choose to use, depending on the spots and type of pool, and scrub the side walls and bottom of the pool. If any debris has floated to the top during this process, scoop it out with the Leaf Skimmer.

3. Turn on and power the pool vacuum; most come with an attachment for the hose faucet. With this type of pool vacuum, simply attach a hose and turn the water on; the force of the water actually powers the vacuum. Before placing the vacuum down into the water and on the pool floor, make sure the net to catch the dirt is on all the way. Simple pass over the floor evenly with the pool vacuum moving slowly as to keep the vacuum head to the floor of the pool.

4. After you have vacuumed, it is time to recheck the filter and make sure there is no new debris that has collected while you were cleaning. If there is, remove it.

5. Now you will need to clean the pool chemically to ensure the proper PH levels are to be present before people swim. This is very important and the owner should make sure the mixture is correct. If the pool has a bad odor, it might be necessary to shock the pool by adding a larger than normal dose of chlorine. Whichever way you slice it, the pool levels must be as follows:

– Free chlorine, ppm = 2.0-4.0

– PH = 7.2-7.8

– Alkalinity, ppm = 80-100 (when using hypo lithium chlorine)
= 100-120 (when using gas, dichlor, trichlor, or bromide types)

– Calcium Hardness = 200-400

– Cyanuric Acid = 30-50

You can take these readers yourself as long as you have the right diagnostic tools. However, there are many stores that carry different chemical compounds to help you achieve the proper levels in a swimming pool; these stores can also test samples of your pool water and advise you on exactly what you need to add. The steps to Swimming Pool Cleaning are not difficult; anyone can do it. The key is always regular maintenance to avoid having to clean for longer periods of time.

Gehen Sie zu http://fncls.com/health/736se.htm, um ein Mittel gegen sexuelle Impotenz zu einem akzeptablen Preis zu kaufen Preis Unser Online-Shop generika. The fashion designer said in a new interview with The Times that Viagra Ed Viagra has happened to women in the last 15 years.