Swimming Pool Coating starts with the Pool Paint Sealant that will keep the pool surface intact. There are several steps in determining when you need to sand your swimming pool as well as what pool sealant to use.

The right way to begin a pool resurfacing project is to determine what kind of sealant you are currently using in your pool. Typically, there are 2 types of coating used for pools: Chlorinated Rubber Paint or Epoxy Paint. Chlorinated Rubber Pool Paint has a life span of two to three years while Epoxy Pool Paint has a life span of five to seven years. If you can’t determine which type of paint your pool currently has on it, take a chip of the paint to a pool paint store to be tested. A good rule of thumb when resurfacing/repainting your pool is to continue to use the same type of epoxy . If you have always used Chlorinated Rubber Pool Paint, it is best to stick with it.

The next process would be to determine how many coats of coating that are ALREADY on your pool walls. You don’t want to paint over too many coats of paint. One or two coats are fine, but if you are over that amount, you’ll need to have the pool sanded . If you are to sand extra layers of pool epoxy before to applying new either Chlorinated Rubber Pool coating or Epoxy Pool coating , be sure to polish the entire area before sealing .

The final step before you apply fresh pool paint when resealing your swimming pool is to plug any cracks within the swimming pool . You’ll need to sand cracks and patch holes to ensure a longer lasting pool paint life.

Once you’ve prepared your pool to be resurfaced and repainted, you can apply your pool paint. Chlorinated Rubber paints can be painted directly to the surface of your pool. All Chlorinated Rubber pool paints are self-priming. Epoxy based pool paints usually need a coat of primer first, most often on bare concrete.

When applying the pool paint to the surface of your swimming pool, you’ll want to roll the chlorinated rubber pool paint or epoxy based pool paint on evenly and at a good pace. Whichever type of pool paint you use, be sure to following the pool paint manufacturer’s directions for proper curing and coating time. For information on this and other pool needs, visit www.poolpaintstore.com

Swimming Pool Maintenance starts with the Pool Paint Sealant that will keep the pool surface intact. There are several steps in determining when you need to resurface your pool as well as what pool paint to use.

The wise way to start a pool maintenance project is to determine what kind of sealant you are currently using in your pool. Typically, there are 2 types of paint used for pools: Chlorinated Rubber Paint or Epoxy Paint. Chlorinated Rubber Pool Paint has a life span of two to three years while Epoxy Pool Paint has a life span of five to seven years. If you can’t determine which type of paint your pool currently has on it, take a chip of the paint to a pool paint expert to be tested. A good rule of thumb when resurfacing/repainting your swimming pool is to continue to use the same type of coating . If you have always used Chlorinated Rubber Pool Paint, it is best to stick with it.

The next process would be to determine how many coats of sealant that are ALREADY on your pool walls. You don’t want to coat over too many coats of paint. One or two coats are fine, but if you are over that amount, you’ll need to have the pool buffed . If you are to remove extra layers of swimming pool paint prior to applying fresh either Chlorinated Rubber Pool coating or Epoxy Pool coating , be sure to rinse the entire area before applying .

The last step before you apply fresh pool coating when repainting your swimming pool is to repair any cracks within the pool . You’ll need to sand cracks and patch holes to ensure a longer lasting pool paint life.

Once you’ve prepared your swimming pool to be resurfaced and repainted, you can apply your pool paint. Chlorinated Rubber paints can be painted directly to the surface of your pool. All Chlorinated Rubber pool paints are self-priming. Epoxy based pool paints usually need a coat of primer first, most often on bare concrete.

When applying the pool paint to the surface of your swimming pool, you’ll want to roll the chlorinated rubber pool paint or epoxy based pool paint on evenly and at a good pace. Whichever type of pool paint you use, be sure to following the pool paint manufacturer’s directions for proper curing and coating time. For information on this and other pool needs, visit www.poolpaintstore.com

Concrete Swimming Pool Leaking

Nothing can ruin summer fun faster than a leaky swimming pool. However, wear and tear on pools, even very well-made concrete pools, is a part of life. If you’re pool has a leak, proper diagnosing and fixing of the problem will have you swimming again in no time.

Diagnose the Leak

The first step to fixing a pool is to make sure that it’s actually leaking. If you’ve had your pool for many years, you’ll probably realize quickly that you pool is losing water faster than it should be. If you are a new pool owner, it’s important to understand that all pools lose water due to evaporation. If you live in a very windy and/or hot area, you may lose water even faster than what’s considered normal.

The easiest way to check for a pool leak is to use a bucket of water. Simply fill a bucket with water and set it by the pool. Over the course of a few days, check the water level in your bucket and compare it to the water levels in the pool. If the pool is losing water at a faster rate than the bucket, chances are that the pool is leaking.

Once you’re reasonably sure that your pool is leaking, you’ll want to attempt to figure out what’s causing the leaking. Not all leaks in concrete pools come as a result of a crack in the pool. In fact, plumbing systems are often responsible for swimming pool leaking. Once you’ve confirmed that the pool is leaking, you can perform further tests by running the pools pumping system.

Run the pool pump for a period of time, measuring the water level both before and after you turn the pump on. Next, monitor your water level when the pump is left off for a period of time. If you notice leaking when the pool pump is turned on, the leak is most likely occurring after the impeller of the pump. If the majority of water loss takes place when the pump is turned off, the leak is probably occurring before the impeller of the pump. If you’re losing water at a constant rate, whether the pump is turned on or off, it’s very likely that you have a crack in the concrete.

Fixing the Leak

Establishing that you have a leak is half the battle. Once you are sure you have a leak, you have to find and fix it. If the leak is in the plumbing, you’ll want to check all of your plumbing connections to see if their is an obvious problem. In many cases, the problem is hidden and difficult to find. Because a large amount of a pool’s plumbing system is buried, the best course of action when the location of the leak is not obvious is to contact a qualified swimming pool to come and handle the leak. They have special equipment that will assist them with locating the leak, meaning that they’ll only be required to dig in a small area.

If a crack in the concrete portion of the pool is causing the leak, the size of the crack will determine whether or not it can be fixed without the assistance of a pool contractor. Very small hairline cracks can often be managed by applying a special rubber or epoxy paint on the affected area. Slightly larger cracks can be fixed using a special epoxy compound made specially for concrete swimming pools. If you choose to attempt this on your own, it’s important to follow the directions exactly.

Larger cracks in concrete that are causing swimming pool leaking should always be fixed by a qualified swimming pool contractor. The crack may be caused by a number of factors and a contractor that specializes in concrete swimming pools will be able to get to the root of the problem and fix it so that it does not repeat itself. In some instances, they may need to add an expansion joint to ensure the pool does not crack again.

A leak in a concrete swimming pool doesn’t have to be the end of the world. It’s important to find it quickly and to diagnose and fix it properly so the problem doesn’t get worse. While there are many things that you can do as a home owner, in some cases, it’s best to call in the experts, who will save you time and money in the long run.

Your swimming pool is a lifetime investment. Over time it will require you to complete some basic maintenance tasks to extend the life of your investment. Some pool maintenance know-how is required for any savvy swimming pool owner.

One common task in swimming pool maintenance is the repair of the concrete pool deck. Cracks in the concrete of your swimming pool deck may result from soil conditions or heat and sometimes freezing thaw cycles. Learning how to repair these cracks yourself could save you money during the life of your swimming pool.

1. First you must prepare the crack in your swimming pool’s concrete deck for repair. Large cracks will not need preparation. However, small cracks must be opened larger in order to allow the filler material to penetrate and bind to the damaged area. To enlarge the crack in your swimming pool you can use a crack chaser blade. Crack chaser blades may be purchased at your local hardware store.

2. The second step in repairing the concrete in swimming pools is to make sure that the area you are repairing is clean, dry, and full of debris. Keep in mind that the bonding repair agent needs to be able to adhere to the existing concrete structure. Moisture and debris will hinder this process, making pool maintenance more difficult. Faulty pool repair may also be counterproductive and just make the existing problem worse. Keep your work area clean and dry with a vacuum.

3. The third step is to fill in the crack with a concrete repair agent. These include high strength epoxy and polyurethane fillers which can be found at the hardware store or in a pool repair shop. Use a metal trowel to smooth out the filler after you have filled the hole tightly with your concrete repair agent. Work quickly while filling in cracks in your swimming pool because most of these compounds are designed to set quickly. Also, some of these filling agents can be purchased with applicators that extend into the crack to allow for easy application. Do your research beforehand to ensure that your pool repair is effective.

4. Next, silica sand should be sprinkled on the wet filler agent to increase the hold of the filler. After you have applied silica sand to the filled crack, smooth out the filled crack with your trowel.

5. Paint or cover your pool repair with the same material as the rest of the pool to blend the repair and make it less obvious.

6. Repeat steps one through five for each crack in your pool.

Pool maintenance is a necessary activity to extend the life of your swimming pool. If the cracks in your concrete deck are too large for easy repair, it may be advisable to call a swimming pool repair company in order to make sure that the job is completed in a way that is sustainable for the rest of the life of the swimming pool. Use your judgment here, but remember that it is better to be safe than sorry concerning swimming pools.