Today we are discussing the Three most common mistakes made by pool owners and what you can do today to ensure they don’t happen to you. 

They are all water chemistry related.  By being proactive you can avoid these blunders and save a bunch of cash at the same time.

1.  Allowing pH to get above 8.0. At 8.5 chlorine is only 10% active. At 7.0 it is about 73% active. By just maintaining pH around 7.5 the chlorine is 50-60% active. Keeping the pH in check will allow you to use to the full potential the chlorine that is already in the pool.

2.  Not checking your pool chemistry often enough. Test your water once a week during the warmer months.  Although it almost sounds remedial, I see this far too often – a pool can go green or get severely out of “whack” pretty quickly.  Stay on top of this so you can make adjustments sooner.  This will avoid you playing “catch up” when things do get out of their desired ranges.

3.  Not keeping alkalinity between 80-140 PPM. Low or high alkalinity has a direct impact on your water balance – most importantly, it can reduce the effectiveness of your sanitizer.

Swimming Pool Cleaning | Swimming Pool Maintence 

 

Hot tub Chemicals are utilised in order to sustain uncontaminated water that is free of bacterias, dire smells and flavours, and gives harmless swimming with no irritation. It is standard industry practice to maintain healthy portable spa water by means of chemical substances, and it is usually also the fastest and easiest method of caring for you and your garden spa. Here we aim to offer you assistance during admending your water balance.

Using chlorine

The sanitizer in luxury hot tubs is the primary barrier it’s water has, making Chlorine essentially the most significant substance used. It is usually suggested to exploit Stabilized Chlorine as the sanitizer, for the reason that its basically pH neutral, rendering its effect on overall water stability dependable. It is advisable to analyze Chlorine ranges whenever you soak, but preferably every single calendar day.

It’s best quantity is between 3 to 5 ppm. Weaken several granules in a little water, prior to adding a tiny amount each time to amend. Correcting overdoses is far more difficult than utilising extra Sanitiser.

Test Total Alkalinity (TA) and pH

This collection of levels is again best examined as habitually as feasible, and almost all urge doing so before every bathing session. The TA has an impression upon pH stability, hot tub discolouration and limescale buildup, as a result it is really critical this is correct. The pH level of the water can have an effect on comfort of bathers, and if incorrect can cause skin irritation.

An optimal TA quantity is from eighty parts per million to one hundred and fifty parts per million, nevertheless confirm with your Hot tub dealer because suggestions fluctuate for assorted machines. One can apply TA increasing chemical, or pH increasing chemical, to change it’s concentration.

The ideal pH value is always 7.4-7.6 pH, thus if your Total Alkalinity value was in shape, however the pH is unsuitable, include a quantity of pH plus or pH minus in minute amounts to correct. Test your Total alkalinity over again when you’ve amended pH.

Effective Use of Spa Shock

Utilising a Shock treatment every week, together with after intense use, can help to oxidise your spa water, which helps get rid of trash and contaminants delivered by users. To allow constant use of your portable spa, it is usually right to work with a non-chlorine shock remedy.

“The notion that grass is just grass should be removed from our minds. There are a lot of ways that grass has helped us. It is used as food for livestock and, for some, as part of their landscaping project. Working with this plant is easy to do. All you need to have are the ideas on how grass should be taken care of. Since there are a lot of grass species, there are also different ways to plant and maintain them. However, the general techniques and ways that the plant is grown should be carefully understood.

Growing grass is a complex process since it depends on the type involved. Choosing the right kind is the correct thing to do. Why is it important to choose the right grass? What is the reason behind having to choose the right grass specie? Basically, there are factors that need consideration in this process. You just need to have the exact seeds and materials to grow them. You also need the right place where you will grow the grass so you can decide how to maintain and develop the area where it grows.

The first consideration is your climate and the zone where you are located. Depending on the specie, grass grows in two types of humidity. There are types we call the warm season variety. This group includes Bermuda, buffalo, zoysia, centipede, and Bahia. And then there are bent, blue and rye grass and fecues. This variety is called cold season grass. Choosing the right specie depending on your zone’s humidity is an important factor to consider when growing the plant. Consider also the elevation of your area and how it is accessible to water and sunlight. You need all these factors to be right for the growth to be healthy.

The different species require high-maintenance. There is the ordinary type that simply grows once planted but there is also another types that requires a lot of water, fertilizers and other chemicals that help improve your grass. Once you grow the plant correctly, all you need to do is follow the maintenance procedure. At this point, you can do your landscaping project. During some form of weather phenomenon like the El niño, you need to plant the drought-resistant variety. It does not require a lot of care since grass grows fast and will survive a long time as long as the soil is in the right condition.”
If you plan to grow grass will take more than just your time and effort but knowledge as well. There are different lawn fertilizers available in the market but remember, not all of them are easy to use and suitable for all types of this plant. It does pay to do your research.

Although having your own pool can be loads of fun, many people worry about the upkeep.  With a few basic pool chemicals and pool cleaning equipment, you’ll be on your way to hours of relaxation and entertainment.

Pool Chemistry

The first step in caring for your pool is making sure the pH level is correct.  You need to maintain an adequate balance of acid and alkali.  Having too much acid in your pool will result in corrosion to your pool equipment as well as skin irritations for the swimmers.  Too much alkaline will produce cloudy water.

A neutral pH is 7.0, and the target pH for swimming pools is between 7.2 and 7.8.  Sodium bicarbonate, an alkaline, and sodium bisulfate, an acid, are two products used to keep pool chemistry in check.  Balancing pool chemistry must be done continuously, because body oils and even debris such as leaves can alter the chemical balance.

Chlorine or Baquacil?

Pool owners have depended on chlorine as a pool disinfectant for many years.  Baquacil is a biguanide, or hydrogen peroxide-based oxidizer, that has become a popular substitute for chlorine.  Biguanides are sanitizers, rather than disinfectants.  Either chemical is effective, but they must never be mixed together.

Chlorine and Baquacil both have pros and cons.  Chlorine kills bacteria quickly but also irritates swimmers’ skin and eyes and can corrode pool equipment.  Baquacil is non-corrosive, but it shortens the life of pool filters and does not disinfect the water.

Swimming Pool Cleaning Tools

There is a large selection of pool cleaning equipment.  The following are some basic tools you will need to keep your pool clean.

  • Telescoping pole:  These poles are either aluminum or fiberglass and extend to various lengths.  The two holes at the end are used for attaching the different cleaning attachments.
  • Vacuum head and hose:  The vacuum head attaches to the end of the telescoping pole, and the vacuum hose attaches to the vacuum head.  You will need to vacuum your pool frequently in order to keep it clean.
  • Skimmer net:  Skimmer nets have a frame covered with a mesh netting.  They are attached to the end of a telescoping pole.  You need to use your skimmer net every day, and sometimes more than once a day, to remove any debris floating on the pool water.  Debris should be removed from the water before it has a chance to sink to the bottom of the pool.
  • Pool and tile brushes:  Brushes for cleaning the sides and bottom of a pool and brushes designed to clean the pool tile band are attached to a telescoping pole.  A weekly cleaning with brushes is recommended.

More Basics

If you have any questions about the care of your pool, ask a local pool service for advice.  You can even take water samples to some pool services for analysis.  And although swimming pool cleaning is important, keep in mind that pool safety should also be your first concern.

Having an in-ground pool can provide many hours of enjoyment for your friends and family, and it can add to the beauty of your home as well. Buying one is also a major investment, and before you go ahead with the construction, you will want to determine which type fits your budget, your locale, and your landscape. Here are your three main choices:

? Fiberglass in-ground pools are constructed from fiberglass-reinforced plastic that is molded into the shape of a basin, and since they are pre-finished and pre-formed, they also come ready to install. Their smooth surface prevents algae from clinging to them, decreases the need for chemicals to keep the pool clean, and simplifies its maintenance. The builder you consult can provide various options that will fit both your taste and your back yard.

? Vinyl-lined in-ground pools are less labor intensive than concrete pools, and in certain parts of the country, they are less expensive as well. They are available in a wide range of colors and linear patterns, including tile motifs, and they can definitely enhance your surroundings. To install the pool, the builder will dig a hole and assemble a plastic, wood, or metal frame around the perimeter, lay sand along the bottom, and secure the vinyl lining to the wall of the structure. Because they are much less expensive than other in-ground types, these pools are also not as durable, and the liner generally needs to be replaced in 10 years.

? Concrete in-ground pools usually cost less than the fiberglass type, but they are also more expensive than the vinyl variety, and the installation can be a 12-week procedure. Once the hole is made and plumbing is installed, the framework is added, and the concrete is poured and smoothed. It may take a week or longer to settle, and plaster, paint, or pebbles can be added as a final touch.

If you choose this type, you can be very flexible with the design of your pool because customizing the fiberglass and vinyl types is expensive, and this can be done easily. A concrete pool will probably not require as much maintenance as a vinyl one would, and it is also more durable and can withstand various climate changes and “small ground movements.” It will also enable you to complement the surrounding landscape, and add to its aesthetic value and the beauty of your home.