Swimming Pool Care starts with the Pool Paint Coating that will keep the pool surface intact. There are several steps in determining when you need to resurface your pool as well as what pool paint to use.

The timely way to begin a pool maintenance project is to determine what kind of non-chlorinated rubber you are currently using in your pool. Typically, there are 2 types of coating used for pools: Chlorinated Rubber Paint or Epoxy Paint. Chlorinated Rubber Pool Paint has a life span of two to three years while Epoxy Pool Paint has a life span of five to seven years. If you can’t determine which type of sealant your pool currently has on it, take a chip of the paint to a pool paint dealer to be tested. A good rule of thumb when resurfacing/repainting your swimming pool is to continue to use the same type of sealant . If you have always used Chlorinated Rubber Pool Paint, it is best to stick with it.

The next process would be to determine how many coats of paint that are ALREADY on your pool walls. You don’t want to seal over too many coats of paint. One or two coats are fine, but if you are over that amount, you’ll need to have the surface sanded . If you are to remove extra layers of pool coating before to re-applying new either Chlorinated Rubber Pool Paint or Epoxy Pool Paint , be sure to wash the entire area before sealing .

The final step before you apply clean swimming pool epoxy when recoating your swimming pool is to plug any cracks within the pool . You’ll need to repair cracks and patch holes to ensure a longer lasting pool paint life.

Once you’ve prepared your pool to be repainted and repainted, you can apply your pool paint. Chlorinated Rubber paints can be painted directly to the surface of your pool. All Chlorinated Rubber pool paints are self-priming. Epoxy based pool paints usually need a coat of primer first, most often on bare concrete.

When applying the pool paint to the surface of your swimming pool, you’ll want to roll the chlorinated rubber pool paint or epoxy based pool paint on evenly and at a good pace. Whichever type of pool paint you use, be sure to following the pool paint manufacturer’s directions for proper curing and coating time. For information on this and other pool needs, visit www.poolpaintstore.com

Incoming search terms for the article:

• seal pool plaster
• repaint plaster inground pool
• pool paint plaster
• how do I re paint my pool
• what kind of paint do i use to paint my pool
• picture of pool that has scaled plaster
• should i apply epoxy paint or plaster my pool
• gunite pool long island paint
• how do i paint my outdoor ground
• repaint inground swimming pool

Bookmark It

Hide Sites

If you expect to dive into crystal clear waters in your home’s backyard swimming pool, then you must put swimming pool cleaning onto your household chore list on a regular basis. It takes a weekly commitment of at least several hours of labor in order to ensure a sparkling clean swimming pool the rest of the week.

There are a number of cleaning tools you should invest in from a pool supply retailer. These include a long-handled netted leaf skimmer which will make removing large pieces of debris much easier; a pool vacuum to remove any dirt or debris that has settled on the bottom of the pool; nylon-bristled floor and wall brushes to clean every vinyl, fiberglass or painted pool surface; a stainless-steel algae brush for removing any build-up on plaster walls; and a hand-held tile brush and pumice stone for removing calcium deposit build-up from any tiled surface.

There are four basic swimming pool cleaning steps that must be taken weekly. First, skim the surface of the water to remove any leaves or other floating debris before they sink to the bottom and reduce the efficiency of the pool’s circulation system.

Next, remove any debris that has accumulated in the pool’s strainer baskets located on the pool deck or attached to the side. Often leaves or other debris get caught here and lessen the pool’s circulation system. So this simple step will increase water circulation which helps keep the pool’s water fresh and sparkling.

Now it’s time for vacuuming the floor of the pool. Take your time in going back and forth over the pool floor, overlapping your strokes slightly each time to make sure your vacuum is picking up any sediment or dirt that has gathered on the bottom. If your vacuum picks up quite a bit of dirt each week, be sure to clean the vacuum filter on a weekly basis so that all your efforts won’t go to waste with a vacuum that has little suctioning power.

Next comes the work of the brush brigade. Brushing the walls of your pool each week helps eliminate algae and calcium build-up as well as other scum that accumulates. Be sure you are using the correct brush for the type of material being cleaned because you don’t want to ruin handsome tiles or the grouting by rubbing them with a scratchy brush surface. Ask your pool cleaning supplier or pool manufacturer exactly which brush is recommended to use on what surface.

All done? Put your swimming pool cleaning supplies away until next week and dive in!

Incoming search terms for the article:

• pool cleaning routine
• WHAT CAN YOU PUT INTO A POOL TO MAKE IT CLEAR?
• inground pool/ cleaning routine
• Swimming pool regular
• swimming pool recirculation system
• pool cleaner pumice sale
• pool cleaner handsome instructions
• how to make sure clean up swimming pool
• how to make it easy to clean pools
• easy pool cleaning

Bookmark It

Hide Sites