Swimming Pool Builder - Swimming Pool Contractor

Swimming Pool Cleaning In 3 Simple Steps

Swimming Pool CleaningAll swimming pool owners know that if you do not regularly maintain the water in your pool then you will end up with green water. The green water occurs when algae forms in the water and begins to stick to the swimming pool. As long as you stick to a schedule you can make sure that you stop algae from forming in your pool. You can then enjoy your pool with out the worry of contracting infections as a result of bacteria and germs living in the water. You can monitor the cleanliness of the water by using an inexpensive test kit and this will let you know the level of swimming pool chemicals to add to the water. This is something you should do regularly as different conditions that effect the water can cause swimming pool chemicals to break down at a faster rate.

Swimming Pool Cleaning

1. Rain Or Shine Will Effect Your Pool – Different types of weather conditions can have dramatic effects on the water in your pool. Large amounts of rain fall and winds will cause pool chemicals to react more quickly in the water. If you live somewhere where you have a hot and humid climate then the chemicals are likely to react at a faster rate. You can deal with these sorts of issues by regularly using pool shock treatments to keep the pool cleaning to a minimum.

2. Put In Some Elbow Grease – You can’t just put swimming pool chemicals in the water if you want a clean pool, you have to put some effort into cleaning it too. Brushing algae off of the swimming pool liner and around the pool will also help. You should also get a good vacuum to clean the bottom of the pool. Automatic robot vacuums are perfect for this as you can just leave them to clean the bottom of the pool when you aren’t using it. You will still want to skim the water with a net to remove any leaves or other debris that might clog up the vacuum or filter.

3. Take Care Of Your Filter РIt is important to make sure you take care of your swimming pool filter. You want to check swimming pool filters on a regular basis as they can become clogged or damaged. If you have one that uses paper filters make sure you change them regularly. If you have a sand filter you need to regularly backwash it to keep it in good shape.  When it come to swimming pool cleaning keeping your filter clean mean everything.

Swimming Pool Cleaning

Most local swimming pool contractors offer swimming pool cleaning and repair…

Visit my swimming pool builder and swimming cleaning home page by clicking here.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

Hayward NavigatorHayward Navigator

Automated swimming pool cleaners are something that is appreciated by everyone. They not only save your save time and money, but also the hassles associated with pool cleaning. There are a number of in-ground pool cleaners available these days. One of such pool cleaners is Hayward Navigator. They have sleek look and provide high performance. It takes around 2-3 hours only to clean any average-sized pool.

The following are some features of Hayward Navigator:

The steering comes with integrated SmartDrive program and provides fast movement of the cleaner. This technology enables the Navigator to take series of right and left turns with the help of the flow of water. This systematic movement makes the process fast and ensures thorough cleaning from the floor of the pool to its walls.

The cleaning path of Hayward Navigator is quite wide. This ensures that the sand, leaves, pollen, twigs and pebbles are completely removed from the bottom of the pool and filters. This type of filter is very useful for those who live in a place that experiences storms frequently. It also has a n exceptional turbine or gearing system which ensures constant and balanced water flow. It reduces noise and makes a gentle movement across the pool bottom.

The Hayward Navigator injection-molded plastic components of these filters are very durable and. Also, the flaps, wings, and shoes ensure less maintenance costs. These parts are easy to install and can be assembled within 15 minutes even without the help of any tools. The Hayward Navigator comes with a warranty period of 2 years on all its components. However, only exceptions are the wearable parts like shoes, wings and flaps. You can use this pool cleaner in any pools made from fiberglass, gunite/ tile, or vinyl. You can also have separate models that are specially designed to suit the requirements of each kind of swimming pool.

Though it is very rare, these cleaners can get stuck while cleaning. This usually happens when some twigs or large pebbles get stuck within the wings. In such cases, you will need to unclog it by taking off the bottom lid and shake the filter gently so that the stone can fall off.

If the hose of the Hayward Navigator is too short, you may face certain problem with the cleaner. At times, it may run in only one place for a longer period of time. Thereby, make sure that the hose of your cleaner is long enough to reach the furthest point of the pool.

Hayward Navigator Automatic Swimming Pool Cleaner

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

At Home Swimming Pool Safety

A swimming pool in your home is a place of enjoyment and relaxation.  However, the pool can be a danger zone and can turn an enjoyable time into a nightmare. Swimming pool safety is essential to have a pleasurable time in your pool. It is a responsible step that you make sure your pool is used safely and that there are no dangers that could cause injury or death.

Kids age four and under have a higher risk of drowning compared to any other age group. Every year, about 300 kids in this age bracket drown in swimming pools at home. Even kids age 14 and under can be victims of unsecured swimming pools at home. In 2002, almost 2,700 kids had drowning related incidents. To prevent this incident from happening in your own pool, you have to consider pool safety procedures to ensure that your swimming pool does not present any danger.

You may not always be around to see that your pool is used safely, so installing barriers around your pool is a must. It should have a fence about four feet high with a thin strip less than four inches apart. The gate of the fence should be self-closing and self-latching that is unreachable to children. If your pool is above the ground, make sure that the steps and ladders are secured, or removed when the pool is not in use to prevent kids from entering the pool without supervision. To improve the protection of your home swimming pool, install door and pool alarms. It is also important that pets have supervised access to the swimming pool since they can mess up the pool area.

Though the area is secured with barriers, it is still important to always watch kids in the water as it only takes seconds for accidents to happen. Do not let kids swim alone, run near the pool, push or jump on others in the water, or dive or jump in shallow part of the swimming area. Post swimming pool rules in the swimming area. Also, you should have a cordless phone, list of emergency hotlines, first aid kit and rescue gears near the swimming area. It would be helpful if you learn CPR.

Inform any guests invited about swimming pool safety and rules. Make sure that the invited guest can swim. Ask parents whether invited kids can swim and, if not, you may select a day to invite them when you will not be opening the pool. Just in case you are having children for the first time, invite the parents of the children as well.

Polluted pool water can be health hazard. You should keep the cleanliness of your pool as it is important for the health of those who use the pool. It is less likely that people will get sick from swimming in your pool if you always keep it clean. It is a good habit to take a shower before you jump into the pool. And for others sake, do not swim if you are sick.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

Swimming Pool Pumps

You can have the biggest, fanciest pool in the neighborhood, complete with tiles imported from Italy or painted with cool designs, floating rafts and fed by a gushing fountain, but without one specific piece of equipment, that shimmering pool can turn into a duck pond in about a week flat. What’s that vital piece of equipment? A swimming pool pump is a crucial piece of mechanics that works hard to keep your pool clean.

A swimming pool pump comes in a variety of sizes, shapes and models. Bigger is not always better, however, so knowing something about pumps and what they do will stand you in good stead as you either build your pool or are in the process of replacing old, battered parts. The size and type of swimming pool you own has a lot to do with the type of pool pump you buy, for manufactures make pumps for above ground and in ground pool needs.

Why is a pool pump so important? Because it works with your pool’s filtration system to keep the pool clean of debris. The pump pulls water out of the pool through a skimmer basket and then through the filtering system, and back into the pool. Without the pump, nothing works.

Most types of pumps will state their capacity, so always know what size your pool is before looking for pool equipment. You should know the basic area of your pool as well as how many gallons it holds. Most pumps will designate how much water they can pump either hourly or by the minute.

In most cases, people run a swimming pool pump for six to eight hours a day, especially in the summertime and when the pool is being used. If your pool is small and stays relatively clean, you can cut back that running time in fall and winter months to save electricity.

All pumps should come with some type of straining basket that is designed to catch leaves, sticks, and toys, or whatever else manages to end up in your pool. These baskets can be oblong, square, open or closed, but as long as they keep debris from entering your filtering system, the shape doesn’t matter.

When selecting any particular swimming pool pump model, check the energy efficiency of the unit to make sure you’re getting the best model to suit your needs. Be prepared to spend anywhere from $100 to $700 for a swimming pool pump. Because it is hard to determine how many hours a day you will need to run your pump, it pays to get a good model, which may be more than you want to spend initially. However, the more efficient the pump, the less electricity will be wasted, so it’s up to you where you want to save your money.

When looking for a swimming pool pump, also take into consideration the age of your filtering system. An old system may not be very efficient in filtering water no matter how powerful the pump is, so don’t throw good money after bad. A pump moves the water, it doesn’t clean it. That’s for your filtering system. Carefully watching chemical levels and water clarity, combined with good water circulation, is the best way to achieve good results with your pool.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS